Water companies to pump a new coating on the annual cost of 80,000

Su Qingrong, Engineer of Technical Equipment Department of City Water Company, was very excited to tell the author: "After we painted the pump with the new industrial paint in the United States, we reduced the food intake of these tigers to eat electricity, saving 158,400 kWh , The company can save 80,000 yuan a year to do it! "City water company responsible for the city's water supply task force, there are only white turtle water plant has a flow of 2160 cubic meters / hour of large-scale water intake pumps 9, in normal operation, each shift To open 7 to 8 pumps, each pump 24 hours average power consumption of about 10,000 degrees, each pump consumes about 4,500 yuan a day. 8 pumps consume 200 million degrees per month, electricity bill more than 1 million yuan. In the company's production and operation, the consumption of electricity has become the largest company's expenses. By adopting a method of avoiding peaks and valleys, they avoided the peak of electricity consumption during the day and increased the production of tap water at night when the electricity bill was low, which saved electricity costs by $ 2.1 million each year. In order to minimize power consumption, the company decided to invest 15,000 yuan, the United States Belzona's ultra-smooth metal coating on the pump smear transformation, by increasing the pump casing and the smoothness of the impeller to improve water flow in the pump housing Flow conditions, reduce resistance, improve pump efficiency. In May, the company carried out coating treatment on No.9 water intake pump at Baiguishan Water Plant. After 712 hours of electricity measurement and tracking, it found that after the coating treatment, the electricity consumption per ton of water was reduced from 223 degrees before transformation to 215 degrees. Every day Saving 440 degrees, saving 13,200 degrees per month, the daily electricity savings equivalent to 220 yuan, each pump can save 80,000 yuan throughout the year. If the operation of the mainframe pump after the transformation, each year can save electricity and materials costs more than 50 million.

Angle Valves

Globe Valves and angle valves are designed for throttling or regulating flow in commercial and industrial applications. Bronze, cast iron, or cast ductile iron materials. Threaded, flanged, or solder end connections.

Angle valves for use in commercial and industrial applications. Typical services include hot and cold water, HVAC, steam, compressed air, gas and other general utility services.
Vacuum angle valve is used for turn on or shut off the airflow in the vacuum pipeline, the applicable media is air and non-corrosive gases.
It has two structures, one is angle type and another is a 3-way type within an ISO-KF or ISO-F various flange end pre-pump port.
a) Small diameter (≤DN50) valve body are precision investment casting.
b) Large diameter (> DN50) valve body are molding shaped seamless steel or steel plate.
c) Bellows sealed structure can withstand 150ºCtemperature, metal sealed structure can withstand 450ºCtemperature.
d) Can install on any position to control the airflow in the vacuum pipeline, as an on-off valve purpose

Angle Valves, Angle Globe Valves, Brass Angle Valve, Zinc Angle Valve

ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsir-valve.com