The pile driver is divided into mechanical and hydraulic.
Mechanical pile driver
During the operation, the pile is placed under the pressure beam, and the pile pulley block is installed on both sides of the pressure beam. The wire rope is taken out from the hoisting machine, bypassing the guiding pulley on the top beam of the pile frame, and then bypassing the moving pulley on the pressure beam and the fixed pulley at the bottom of the pile frame, the hoisting machine is wound into the steel wire rope, and the pile pulley block is gradually tightened and passed through the pressure beam. The weight and weight of the entire pile driver are applied to the top of the pile to overcome the frictional resistance between the pile and the soil, and the pile is gradually pressed into the soil. There is a lifting pulley block on the top beam of the pile frame for hoisting the pile, and there is a gantry in the middle of the pile frame to guide the direction of the pile. Wire rope winding must be reasonable to balance the force. The two winches strive to synchronize. In order to offset the difference in traction speed, there is a balance pulley group on the top beam, and the wire ropes of the left and right pile piles are connected. On both sides of the lower part of the pile frame is a boat-shaped rail seat with rails. During operation, the rail seat is lifted and the whole machine is supported on the center base. When shifting, the rail seats on both sides move forward and the walking wheels roll on the rails. Suitable for pressing concrete piles and steel piles in clay, silt and sand.
Hydraulic pile driver
It consists of pile frame, hanging pile crane, hydraulic pile clamp, pile hydraulic cylinder and electrical equipment. The pile frame is the supporting part of the whole machine, and is equipped with a main platform, a guiding platform, a column and a lower walking trolley. The hoisting pile crane is mounted on the top of the column to hang the pile in place. During the operation, the hydraulic gripper clamps the pile head, and then the pile gripper is pushed by a pair of pile hydraulic cylinders to sink the pile. A machine is equipped with a number of hydraulic cylinders for pressing piles, which can press several piles at the same time. Electrical equipment is used to drive the main pump to run and move mechanically. It is suitable for pressing steel or I-beam piles in backfill soil, silt, clay and other places, which is suitable for urban construction.
When the pile driver is working, the pile head is not damaged, the pile body is not bent, no noise, no vibration shock, little impact on the surrounding environment and buildings, and does not damage the land structure. In the process of pile driving, the bearing capacity of the pile can be directly read from the pressure gauge without further experimentation. The work is stable, the pressure can be pulled out, but the equipment is cumbersome, and the inclined pile cannot be pressed, and the use is limited.
Mixed Glass Mosaic Tiles is a special glass mosaic design which made up of different shapes along with various colors. It is made from Recycled Glass Mosaic Tiles and the main character is the fullbody color, it means the whole piece is in the same color and its color is solid, which is different from the crystal mosaic.
This Mixed Glass Mosaic Tiles serie include round glass mosaic tiles bubbles,chevron mixed glass mosaic tile and other mixed shape. It gives a unique design and provides endless design possibilities from contemporary or classic, it will create an elegant ambiance for your home decoration.
Coloured Glass Tiles,Black And White Mosaic Tile,Decorative Mosaic Tiles,Mixed Glass Mosaic Tiles
C&K MOSAIC , https://www.cnkmosaics.com