( 1 ) Â Â Â Â Â Â After the floor is laid, clean the floor surface and let it cover the wax after it is completely dry. Use liquid wax, do not use solid wax, every 2--3 months to play a floor wax; (if larger flow of people on the factory floor or the field needed a month to play a wax)
( 2 ) Â Â Â Â Â Â In the daily maintenance of the cleaning of the floor, the dust should be used, the dust should be sprayed with electrostatic dust-trapping agent, and the electrostatic dust-trapping agent can be used for one week;
( 3 )       The function of the dust-trapping agent is to adsorb the dust on the surface of the floor to the dust. After the push-out, take it to the outside and shake it to shake off the adsorbed dust. The title of “ dust-trapping agent †comes from this;
( 4 ) Â Â Â Â Â Â The dust is dirty and can be washed clean, and then sprayed with a dusting agent after drying;
( 5 ) Â Â Â Â Â Â The floor that has been waxed on the floor should not be scrubbed with water. If a large amount of water is infiltrated, the wax on the floor will naturally fall off.
( 6 ) Â Â Â Â Â Â Wood floor maintenance: Since the water is easily absorbed by the wooden floor, the wooden floor is shrunk and deformed; when the wooden floor is scrubbed with a rag or mop with water, the dust rubs the floor like sandpaper, and the luster of the wooden floor is worn overnight. When it was dropped, the paint surface was also damaged.
( 7 ) Â Â Â Â Â Â The material properties of the wooden floor are not washed with water or solvent when cleaning the wooden floor. Otherwise, the shrinkage, deformation, lacquer surface peeling and appearance of the wooden floor may be caused. It must be cleaned with a special wood floor cleaner to clean and cover the floor.
Basic introduction: wax - floor waxing - polish
Strictly follow the professional process construction to ensure that the wooden floor is as bright as water, and it is very durable and durable. At present, it can only be pushed with dust, which can protect the floor and beautiful family. For wax oil, there are mainly two kinds of solid waxes and liquid waxes, but most of the liquid floor waxes are selected.
( 8 ) Â Â Â Â Â Â The advantages and disadvantages of liquid wax and solid wax (solid wax is an oily wax, which appears to be brighter than liquid wax at the time, but the abrasion resistance and hardness are not as good as liquid wax). Test solid wax and liquid wax. A sample of each of the liquid waxes was used. Under the flow of hundreds of people, the liquid wax was hard on the floor as soon as half a month later, and the solid wax portion had already worn away.
( 9 ) Â Â Â Â Â Â Liquid floor wax PVC floor wax water epoxy floor wax wear-resistant floor maintenance wax artificial stone floor wax environmental protection floor wax general floor wax anti-static floor wax anti-static wax water manufacturer by Dongguan Sanji Cleaning Products Co., Ltd.
( 10 ) Â Â The following floor waxing - daily maintenance - waxing detailed process
First, the waxing program :
1. Sanji Neutral Almighty Cleaner is cleaned by brushing the floor ( de-oiling , decontaminating ) with a ratio of 1:30 . Sewage suction machine to dry, wait until the floor is air-dried; (Note: must wait for the floor to be completely dry)
2 , Sanji brand hard light wax mop the floor surface, when dragging wax, pay attention to drag in one direction ( either left and right direction, or front and rear direction ) to evenly spread the wax on the ground. After finishing the first layer of wax for 30-50 minutes, the wax can be dried before the second layer of wax can be dragged as above; Note: (1. Please go to the de-waxing . ( 2. If the floor is not urgent, the most recommended Good 60 minutes to dry)
3 , Sanji brand hard light wax does not need to be polished for the first time, can be polished after 2-3 times, and polished with a white scouring pad. The surface of the wax is not bright , the stains can be polished , and the surface is bright as new. Repeatedly polishing 4-6 times without polishing indicates that the floor is wax-free and needs to be re-waxed.
Second, daily maintenance :
1 , Sanji brand electrostatic cleaner liquid spray with spray can spray on the bottom of the dust push, after the air drying, push the dust ( note that the electrostatic dust cleaner has a vacuum function to the wax surface is not damaged ) ;
2 , when there are stains on the surface of the wax, use the Sanji brand neutral all-purpose cleaner to match the water with a ratio of 1:10 . Do not use the surface of the water to wipe the wax; (Note: the mop is wet, not too much)
3 , the wax is not bright when there are dust and stains can be polished with a white special polishing pad that is as bright as new.
Third, waxing:
1, waxing 10-15, for about 12-18 months from rising wax 1;
2 , Sanji brand strong waxing water with hot water about 50 degrees Celsius , spray the surface of the wax in a ratio of 1:3 , after 15-25 minutes , use a wiping machine with a strong wax pad to wax, then use the vacuum to absorb water The machine is sucked dry, and then the neutral all-purpose cleaner is dispensed with water 1:35 into the water tank of the scrubbing machine for washing. After the water is drained and dried, it can be waxed.
Aluminum Cam locks,Aluminum Camlock Couplings,Aluminum Standard Camlocks
Cixi Chengtuo Hardware Parts Factory , https://www.ibccoupling.com