The faucet spool resembles the heart of the faucet, adjusting the size of the water and the water switch. If the faucet valve is broken, it will cause the faucet to leak. So, how to do if the hot and cold faucet valve is broken? How to change the hot and cold faucet valve ? Do not worry, the following Xiaobian tells everyone how to buy a new valve, how to remove the old valve, how to replace the new valve.
Hot and cold faucet valve core is broken how to do hot and cold faucet valve core how to change
How to buy a new valve?
Replace the new spool must match your tap. First, find out if your faucet is single-handed or double-handed. Whether it is a single cold faucet or a hot and cold faucet. Also be clear how big your faucet's spool is. The size of the plug also refers to the amount of water flow. Small valve The core is generally not easy to buy on the market, so it is generally best to remove the old ones and look for sellers.
How to remove the old valve plug?
Method one: Close the main water valve first, and then put a red and blue mark of 8 mm on the handle of the faucet, buckle it down, loosen the fixing Screw counterclockwise with a flat-head screwdriver, take the handle, and open the faucet with a loose wrench. The valve plug opens the upper part of the cover with a wrench and removes the ceramic valve plug inside.
Method 2: Close the main water valve first. You can use a screwdriver to insert the handle under the faucet and pull it up and down. Use a screwdriver to pull it sideways. Slowly and evenly, use force so that you can remove the valve plug.
Method 3: Close the main water valve first, and unscrew the blue cover on the right handle. Use a Phillips screwdriver to loosen the screw inside. Take off the handle to expose the valve plug. Use an adjustable wrench to unscrew the valve plug.
How to replace the new valve?
After removing the valve plug, you will see a blue rubber eraser on the bottom of the valve plug. It is customary to have a red rubber at the bottom of the left valve plug and a blue eraser at the right. Therefore, when changing the right valve core, it is still necessary to use a blue rubber valve core. After the valve core is installed, the handle is inserted and the direction of the hand wheel is adjusted. When the handle is on both sides, the water is turned off, and the direction of the person standing is boiling water. Install the screw and cover the blue lid on the right. This will replace the new cartridge.
Hot and cold taps more about how to do bad spool and hot and cold water faucet valve core how to change a brief introduction here, I hope for your help. For more information, please visit this website. Stay tuned.
Hot and cold water faucet
Brass knurled thread insert Made of material, good thermal conductivity and heat resistance.
Widely Used On the Injection molding for Tightly Fixing.
Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection.
China leading manufacturers and suppliers of Hex Nut,Hexagonal Nut, and we are specialize in Stainless Steel Nuts,Hex Nut Bolt, etc.
Brass hex nut,hex coupling nut,hex flange nut,hex thin nut,hex bolts and nut
Shenzhen Lanejoy Technology Co.,LTD , https://www.grill-grid.com