Gypsum board is one of the commonly used materials when decorating the ceiling. I believe everyone knows it! The gypsum board ceiling can not only make a perfect shape, but also a lot of discount on the decoration price. So everyone knows the gypsum board ceiling construction process? Today, Xiaobian will take a look at the gypsum board ceiling construction process and precautions! I hope you can help you.
Construction process of gypsum board construction process
Steps such as measurement and material selection are required before ceiling construction. This not only greatly reduces the troubles in the construction, but also guarantees the safety of the use in the future.
Before the formal construction, the horizontal pipe should be used to measure whether the ink line of the wall bomb is horizontal, so that the suspended ceiling will not be inclined or there will be a high and low drop.
The gypsum board ceiling needs to be fixed on a solid wooden keel frame, so it is necessary to carefully select the keel material with good nail holding power.
Because the keel is woody, the gypsum board construction process generally requires that the surface of the keel must be evenly painted with fireproof coating until the entire keel is visible to be nailed to the wall.
After the keel surface fire treatment is finished, it can be combined, because the nail gun is needed at this time, so it is necessary to grasp the strength to prevent the keel from cracking.
After nailing the keel frame, it is necessary to fix the frame to the wall. In this case, it is necessary to carefully check whether the spacing between the frames is not more than 300 mm, so that the sufficient fastness can be obtained, otherwise the gypsum board on the frame is easy to sink and break.
Next, it is necessary to officially put the gypsum board. At this time, it is best to let the worker use the stainless steel drywall nail to fix the gypsum board, so as to ensure that the gypsum board will not affect the appearance because the nail is easy to rust.
The nail holes on the gypsum board can be filled with cement, and the treatment effect is not worse than the rust-proof nails.
Precautions for gypsum board ceiling construction technology
1. The installed keel shall not be slammed on the keel. The hanging parts or heavy objects of other types of work are strictly prohibited from hanging on the light steel keel.
2. During the construction of the ceiling, attention should be paid to the protection of various line pipes installed in the ceiling. The suspension rods and keels of the light steel keel are strictly prohibited from being fixed on the ventilation pipes and other equipment.
3. The installed ceiling is strictly prohibited from collision and pollution.
Working conditions of gypsum board ceiling construction technology
1. Release the main control line on site according to the construction drawings.
2, the ceiling has been laid on the keel position
The above is the gypsum board ceiling construction process and precautions that Xiaobian introduced to you today. It is over here. I believe that everyone has a certain understanding of the gypsum board ceiling construction process through today's introduction. We will not be in the decoration. Was fooled. For more information, please stay tuned to the renovation home.
More related wonderful reading:
Main points of the balcony gypsum board ceiling
Qinggang keel gypsum board ceiling installation steps gypsum board ceiling material
How to choose the living room ceiling? How about the living room plasterboard ceiling?
Gypsum board price introduction gypsum board ceiling installation method
Gypsum board ceiling installation process gypsum board ceiling price
Gypsum board ceiling price introduction gypsum board ceiling installation method
Metallographic Microscope ,Optical Microscope For Metallographic Observation,Inverted Metallographic Microscope,Portable Metallographic Microscope
Ningbo Beilun Kalinu Optoelectronic Technology Co.,Ltd , https://www.nbyxmicroscope.com