How to measure the temperature of the mold

Is it necessary to know the temperature of the mold in production? The answer is yes, temperature is very important for the mold, whether it is the production of tile equipment mold, manhole cover mold or some other mold temperature is very important, if the temperature is not well grasped, it may cause the mold is not formed or There is a problem in the practical process. Since the temperature is so important, how should the plastic mold factory measure the temperature of the mold? The following brief introduction is for reference only. Speaking from two aspects: surface contact thermometer measurement; temperature pen measurement method specifically speaking below. This is commonly used two kinds of mold temperature measurement methods, of course, there are some unusual mold temperature measurement methods will slowly contact.

: The surface temperature of the mold is directly measured with a surface contact thermometer. The method is simple, and readings can be obtained. Second: The mold temperature was determined by using the melting point of different salts or the characteristics of discoloration at different temperatures. It is recommended that the mold manufacturer use a variety of methods. Why not recommend the second one because it is portable, but the measurement range is limited, and often the data read out is inaccurate.

Simply say this and hope to provide some help to our friends.

Feilong Mould Factory specializes in providing all kinds of barrier moulds and road grave die, slope protection moulds, well cover mould boxes and other plastic mould products and plastic color brick mould box hydraulic presses and other products.
Feilong Plastic Mould Factory Website/
Contact person: Liang Lijun Mobile address: Yanzhuang Industrial Zone, 200 meters eastbound, Baoding, Hebei, China