Product Description
1.This hot air soldering gun is with thermostat temperature adjusting function, with overtemperature protection with result in convenient and save usage.
2.This heat gun is with imported motor and michrome wire as a result its working life is long and heating efficiency is hight.
3.This power tool hot air gun is with good quality heat insulation inside ensures longer using life of the heating filament.
Â
| Hot Air Gun JF-1600WD | |
| Power Input | Available In 220V |
| Temperature Range | 50-550 ºC |
| Temperature stability | ±1ºC |
| Noise | <45dB |
| Power Consumption | 1600W |
| Heating Element | Metal Heating Core |
| Air Capacity | 190-350L/Min(max) |
| Station Dimensions | 245H*200L(MM) |
| Package Size | 280*250*80(mm) |
| Gross Weight | 0.8 KG/Set |
Features
product description of digital hot air gun heat gun:
Â
   • Import motor, high-performance, longer service life.
   • Imported biotite Ni-Cr alloy wire heating core, overheat protection device, rapid heating, power foot, long life.
   • Double vortex air outlet, soft wind does not damage the device.
   • Sensor closed loop, microcomputer zero trigger temperature control, temperature accuracy and stability.
   • Push-button thermostat 10 degrees a tune, the minimum temperature of 50 ° Maximum temperature of 550 °, the temperature can be adjusted within a wide range.
   • Three-speed electronic circuit to control air flow:190-350L/MIN
   • 20 seconds off delay, effectively extending the heater core life.
Application
1.Tin desolding ,thaw, depainting, plastic heating, lab vessel cleaning, liquid heat  ergy transfer, bond intenerating etc.
2.Various of nozzles and spare parts for choice;
3.Maximum power consumption reach 1600W,temperature 50-550°C,High efficiency and easy operating;
4.Temperature adjustable system.
Â
MHEC or HEMC is a non-anionic Cellulose Ether which is produced by reaction of alkali cellulose with Methylene Chloride and Ethylene Oxide under a pressure reactor in the absence of air at about 40 deg to 50 deg celsius. Then the reactor is vented, excess NaOH is neutralized and purified by appropriate means. After purification, cellulose is dried, granulated or grounded or surface treated according to the requirements.MHEC is used as a water retaining agent in various construction applications like cement based wall putty, gypsum based wall putty, cement motors, gypsum spray plasters, tile adhesives.
Methyl Hydroxyethyl Cellulose MHEC
Methyl Hydroxyethyl Cellulose MHEC,Hydroxyethyl Methyl Cellulose,Chemical Hydroxyethyl Methyl Cellulose,Methyl Hydroxyethyl Cellulose
JINZHOU YICHENG CELLULOSE CO.,LTD. , http://www.hbyichenggroup.com