The EU market requires personal protective clothing such as winter clothes, electric clothes, high temperature clothes, antifreeze clothes, chemical resistant clothes, anti-ionization suits, complete isolation suits, etc. CE marking is required. The CE mark is a mandatory certification mark for the European market on the basic health and safety requirements of some products. The European Commission laid down basic requirements for protective clothing and the standards were harmonized throughout the European economic region. 
All manufacturers of protective clothing outside Europe or Europe must comply with the requirements of the CE mark to allow the product to circulate in the European market. Therefore, European consumers believe that the CE mark is a symbol of product performance and quality assurance.
Protective clothing certification standards: EN 342: Protective clothing - cold-proof whole or outerwear
EN 343: Protective Clothing - Rainproof
EN 348: Protective clothing - Test methods: Determination of material impacted by melting of small metal marbles
EN 381: Protective clothing for people using a hand-held chainsaw
EN 373: Protective clothing - Resistance of materials to molten metal splashes
EN 470-1: Protective clothing for welding processes - Part 1: General requirements
EN 471: Professional Highly Visible Warning Clothing - Test Methods and Requirements
EN 510: Protective clothing with entanglement hazards when moving
EN 531: Protective clothing for workers exposed to heat (except protective clothing for firefighters and welders)
EN 533: Protective clothing - Protection against heat and flame - Limited flame propagation materials and material combinations
EN 943-1: Protective clothing against liquids and gaseous chemicals including liquid smoke, solid particles, etc. - Part 1: Performance requirements for vented and non-vented, gas-tight chemical protective clothing
EN 943-2: Protective clothing against liquids and gaseous chemicals, including liquid smoke and solid particles, etc. - Part 2: Performance requirements for airtight chemical protective clothing for emergency teams
EN 1073: Protective clothing against radiation contamination
EN 1082: Protective clothing - Gloves and arm protective clothing for cutting and stabbing of hand knives
EN 1149: Anti-static clothing EN 1150: Protective clothing - Visual clothing for non-professional use
EN 1486: Protective clothing for firefighters - Test methods and requirements for reflective materials for professional firefighters
EN 1621: Protection against Mechanical Collisions by Motorcycle Protective Clothing
EN 13034: Protective clothing for personal chemical liquids
EN 13158: Protective clothing - Protective jackets for equestrians, body and shoulder protection
EN 13546: Protective clothing - Field guards' hand, arm, chest, abdomen, foot and genital protection and sports field athletes' metatarsal shields - Requirements and test methods
EN 13567: Protective clothing - Fencers hand, arm, chest, abdomen, leg, genital and face protection - requirements and test methods
EN 13595: Protective clothing for professional motorcyclists - jackets, pants and one piece or uniform
EN 13998: Aprons, trousers, vests, etc., cut from hand-knife
EN 14058: Protective clothing - Protective clothing for cold environments
EN 14120: Protective clothing - Safety wrists, palms and elbows for users of roller sports equipment - Requirements and test methods
EN 14126: Performance requirements and test methods for protective clothing-infective protective clothing
EN 50286: Electrical insulation protective clothing for low-voltage installation work
EN 60895: Conducted clothing with normal voltage in the field to 800±600kV
Protective clothing certification application process:
For the protection of electric clothes, high temperature clothing, antifreeze clothing, chemical resistant clothing, anti-ionization suits, complete isolation suits, etc. The general certification process is:
The manufacturer submits samples and technical data – the certification body laboratory tests – the certification body auditor comes to the factory to audit – everything passes, the certificate is issued – the annual continuous supervision for other protective clothing, the general certification process is: the manufacturer submits samples and technologies Information - Testing by Certification Body Laboratories - Test Passes, Issuance of Test Reports and Certificates - Manufacturers Placing CE Marks
All manufacturers of protective clothing outside Europe or Europe must comply with the requirements of the CE mark to allow the product to circulate in the European market. Therefore, European consumers believe that the CE mark is a symbol of product performance and quality assurance.
Protective clothing certification standards: EN 342: Protective clothing - cold-proof whole or outerwear
EN 343: Protective Clothing - Rainproof
EN 348: Protective clothing - Test methods: Determination of material impacted by melting of small metal marbles
EN 381: Protective clothing for people using a hand-held chainsaw
EN 373: Protective clothing - Resistance of materials to molten metal splashes
EN 470-1: Protective clothing for welding processes - Part 1: General requirements
EN 471: Professional Highly Visible Warning Clothing - Test Methods and Requirements
EN 510: Protective clothing with entanglement hazards when moving
EN 531: Protective clothing for workers exposed to heat (except protective clothing for firefighters and welders)
EN 533: Protective clothing - Protection against heat and flame - Limited flame propagation materials and material combinations
EN 943-1: Protective clothing against liquids and gaseous chemicals including liquid smoke, solid particles, etc. - Part 1: Performance requirements for vented and non-vented, gas-tight chemical protective clothing
EN 943-2: Protective clothing against liquids and gaseous chemicals, including liquid smoke and solid particles, etc. - Part 2: Performance requirements for airtight chemical protective clothing for emergency teams
EN 1073: Protective clothing against radiation contamination
EN 1082: Protective clothing - Gloves and arm protective clothing for cutting and stabbing of hand knives
EN 1149: Anti-static clothing EN 1150: Protective clothing - Visual clothing for non-professional use
EN 1486: Protective clothing for firefighters - Test methods and requirements for reflective materials for professional firefighters
EN 1621: Protection against Mechanical Collisions by Motorcycle Protective Clothing
EN 13034: Protective clothing for personal chemical liquids
EN 13158: Protective clothing - Protective jackets for equestrians, body and shoulder protection
EN 13546: Protective clothing - Field guards' hand, arm, chest, abdomen, foot and genital protection and sports field athletes' metatarsal shields - Requirements and test methods
EN 13567: Protective clothing - Fencers hand, arm, chest, abdomen, leg, genital and face protection - requirements and test methods
EN 13595: Protective clothing for professional motorcyclists - jackets, pants and one piece or uniform
EN 13998: Aprons, trousers, vests, etc., cut from hand-knife
EN 14058: Protective clothing - Protective clothing for cold environments
EN 14120: Protective clothing - Safety wrists, palms and elbows for users of roller sports equipment - Requirements and test methods
EN 14126: Performance requirements and test methods for protective clothing-infective protective clothing
EN 50286: Electrical insulation protective clothing for low-voltage installation work
EN 60895: Conducted clothing with normal voltage in the field to 800±600kV
Protective clothing certification application process:
For the protection of electric clothes, high temperature clothing, antifreeze clothing, chemical resistant clothing, anti-ionization suits, complete isolation suits, etc. The general certification process is:
The manufacturer submits samples and technical data – the certification body laboratory tests – the certification body auditor comes to the factory to audit – everything passes, the certificate is issued – the annual continuous supervision for other protective clothing, the general certification process is: the manufacturer submits samples and technologies Information - Testing by Certification Body Laboratories - Test Passes, Issuance of Test Reports and Certificates - Manufacturers Placing CE Marks
Microscope Slides And Cover Slips
1. The glass slide is used to put the sample to be tested, and the cover glass is covered on the sample to be tested.
2. The glass slide is at the bottom, which is the carrier for the material you want to observe, that is, you want to put something on it.
3. The cover glass is smaller than the slide glass. The glass slide is mainly used to hold the observation objects. The cover glass is covered on the slide glass and used for fixing.
4. The glass slide is a thicker piece of glass in the transfer slide, which is used to carry the real object. The cover fragment is the small round or square thin one.
5. Mounting is a general term for a set of things, including slides, coverslips and loaded objects
6. The cover glass is square, the slide glass is rectangular, and the width is longer than the side of the cover glass.
microscope slide and cover slip,microscope slide and cover slip cube,microscope slide dimensions and cover slip
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yymeds.com